EasyManuals Logo
Home>Danfoss>Thermostat>Link DBR

Danfoss Link DBR User Manual

Danfoss Link DBR
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
VIIOS202 © Danfoss 07/2017
Installation Guide Danfoss Link™ DBR Installation Guide Danfoss Link™ DBR
The Danfoss Link™ Dynamic Boiler Relay (DBR) is an electronic
device for turning gas and oil boilers ON/OFF depending on
heat demand.
The Danfoss Link™ DBR must in applications with bypass valve
such as AVDO, be installed in combination with the ESM-11
temperature sensor (included inside the box) for turning the
boiler ON/OFF based on heating demand and water tempera-
ture in return pipe for running the system at optimal energy
efficiency.
This pack includes:
1 x Danfoss Link™ Dynamic Boiler Relay
1 x ESM-11 Temperature Sensor
Introduction
Installation
The Danfoss Link™ wireless system’s transmission range is su-
cient for most applications; however each building has dierent
obstacles aecting communication and maximum transmission
distance. If communication problems occur Danfoss suggests
that accessories would be required to support the system, such
as repeaters.
In exceptional cases the wireless system may not be suitable for
your installation.
Be aware that installation and placement must be
according to local building regulations.
NL
FR
UK
Installation in application with bypass valve
using AVDO
In installations with bypass using AVDO, remember to mount
and wire the ESM-11 Temperature Sensor included in the pack.
Condensing
Boiler
Bypass
Valve
(AVDO)
Dynamic Boiler
Relay (DBR)
ESM-11
Temperature
Sensor
70C
70C
50C
50C
Note:
· The ESM-11 Temperature Sensor needs to be mounted on the
return pipe.
·Mount the ESM-11 Temperature Sensor in the bypass circuit
(gure 1) and not outside of the circuit (gure 2). Pay attention
that the ESM-11 must be outside the circuit of an eventual stor-
age tank
Condensing
Boiler
Bypass
Valve
(AVDO)
Dynamic Boiler
Relay (DBR)
ESM-11
Temperature
Sensor
70C
70C
50C
50C
Condensing
Boiler
Dynamic Boiler
Relay (DBR)
70C
70C
50C
50C
Bypass
Valve
(AVDO)
ESM-11
Temperature
Sensor
Figure 1
Figure 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss Link DBR and is the answer not in the manual?

Danfoss Link DBR Specifications

General IconGeneral
BrandDanfoss
ModelLink DBR
CategoryThermostat
LanguageEnglish

Related product manuals