6
VIFZA35X © Danfoss 02/2011
Installation
The Danfoss Link™ wireless system’s transmission range is
sufficient for most applications; however each building has
different obstacles affecting communication and maximum
transmission distance.
If communication problems occur Danfoss suggests that
accessories would be required to support the system, such as
repeaters. In exceptional cases the wireless system may not
be suitable for your installation.
Please be aware of the following, when installing Danfoss
Link™ RS:
Do not install Danfoss Link™ RS, where it will be subject to
direct sunlight.
The installation height should typically be between 80-
150 cm.
In wet rooms it shall be installed according to local
building regulations.
At least 50 cm away from windows/doors that will be left
open occasionally.
Installation Guide Danfoss Link™ RS
To Next Page
Loading...
Need help?
General
