Danfoss TP4 User Manual

17
20
i2 24
pm
Press PROG until the colon in the LCD
display starts to fl ash.
The unit is now in RUN mode and the
heating will come on and go off at the
programmed times
Note: A fl ame symbol will appear in
the display whenever the thermostat is
calling for heat.
Ensure the TP4 is in RUN mode before
sliding the cover shut.
Please go to page 20.
!
User Instructions
GB

Danfoss TP4 Specifications

General

Brand	Danfoss
Model	TP4
Category	Thermostat
Language	English