11
GB - User Instructions
To convert to Thermostat mode
Press & hold and together until
display changes to colon blinking &
default temperature (8°C).
Press or to alter temperature
as required.
(If not already in Thermostat Mode, press
& hold and together until display
changes to colon blinking & 8°C)
Press DAY (display will show a suitcase
and :00)
Press + and - to enter number of days
of holiday (max.99)
Use and buttons to alter the
constant temperature, if required.
When selected number of days have
elapsed, the unit will return to normal,
controlling according to your set
programmes.
NOTE: Press and buttons together
to exit holiday mode if necessary
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can be converted to control at a constant user
selected temperature, instead of following the set programme.
!
NOTE: unit will remain in thermostat mode until the
and buttons are pressed together again.
The TP7000 can control at a constant low temperature while
you are away on holiday, returning to your programmed settings
after a specifi ed number of days (maximum 99 days).
To Next Page
Loading...
Need help?
General
