Danfoss Heating
7
GBGB
ON
Keyboard Enabled
Reset Enabled
OFF
Keyboard Disabled
Reset Disabled
SW. No
SW.1
SW.2
3.6 The unit can be made tamperproof if required by setting the
DIL switches which will disable the keyboard, and/or the reset
functions. The DIL switches are located on the back of the unit.
3.7 Mount the unit on the wallplate
3.8 With the unit powered up, it is recommended to press and release
the RESET button to start up the TP7001 unit.
The TP7001 incorporates a number of advanced features which
can be set by the user. These are accessed via the User Advanced
Programming Mode, please refer to User Advanced Programming
in the User Instructions for details.
The TP7001 incorporates an additional number of advanced features
which can be set by the installer to improve the operating e ciency
of the system and where required, to change the user functionality
of the product. These are accessed via an Installer Advanced
Programming Mode. These settings are optional and need only be
accessed if there is a demand for the enhanced functions.
4.0 Installer Advanced Programming Options
4.1 Service Interval Timer
Instructions on how to access this feature are available from our
customer support desk. Please note these are only issued to boni- de
heating installers.
Note: Always switch
the mains o rst
and never t/remove
the thermostat to/
from a live wallplate.
To Next Page
Loading...
Need help?
General
