Danfoss TPOne-M Installation Guide

26
TPOne-M
Sensor Fail If the TPOne in-built temperature sensor is
measuring outside it’s operational parameters
then it may have failed. If this warning cannot be
reset then contact your service provider for advice.
External
Sensor Fail
If an external temperature sensor has been
tted and the TPOne is measuring outside it’s
operational parameters then it may indicate a
problem with the external sensor or connecting
cable. If this warning cannot be reset then contact
your service provider for advice.
Floor
Sensor Fail
If a oor temperature sensor has been tted and
the TPOne is measuring outside it’s operational
parameters then it may indicate a problem with
the oor sensor or connecting cable. If this
warning cannot be reset then contact your service
provider for advice.
Warnings (continued)

Danfoss TPOne-M Specifications

General

Brand	Danfoss
Model	TPOne-M
Category	Thermostat
Language	English