5.5. Torque Specifications for Installation
Illustration 5.5: Overview of Inverter with Torque Indications, 1-3
Illustration 5.6: Overview of Inverter with Torque Indications, 4-7
Parameter
Screwdriver Tightening Torque
1 Terminal blocks (large) Straight slot 1.0 x 5.5 mm Min. 1.2 Nm
2 Terminal blocks (small) Straight slot 1.0 x 5.5 mm 0.5 Nm
3 PE Straight slot 1.0 x 5.5 mm 2.2 Nm
4 M16 SW 19 mm 2-3 Nm
5 M25 SW 30 mm 2-3 Nm
6 Front screw TX 30 6-8 Nm
7 Locking screw TX 30 5 Nm
Table 5.6: Nm Specifications
5. Technical Data
28 L00410309-07_02
5
To Next Page
Loading...
Need help?
General