Danfoss Heating
11
GB
5. To set the times required for SA
and SU repeat steps 1-3 or if the
same settings are required press
COPY.
6. Press the PROG button once to
return the unit to RUN mode (time
appears and colon in the display
begins to fl ash).
7. Proceed to page 14.
Please Note
If this setting is made on a weekend day SASU will show in
place of MOTUWETHFR.
1. Press PROG once until SET ON TIME
appears at the top of the display.
Note the current day is displayed.
Press the DAY/HOL button until the
required day is displayed.
2. Use the + or - buttons to set the
time you want your system to fi rst
come on in the morning (Event 1).
3. Press NEXT ON/OFF to move to
Event 2.
1.7.2 Programming the On/Off times in 7 day
mode
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
To Next Page
Loading...
Need help?
General
