Danfoss Heating
13
GB
1. Press PROG once until SET ON
TIME appears at the top of the
display.
Use the + or - buttons to set the
time you want your system to fi rst
come on in the morning (Event 1).
2. Press NEXT ON/OFF to move to
Event 2.
Continue programming the
system ON and OFF times by
pressing:
a) NEXT ON/OFF button to move
to the next setting,
b) + or - buttons to amend the
time.
3. Press the PROG button to return
the unit to RUN mode (time
appears and the colon in the
display begins to fl ash).
4. Proceed to page 14.
1.7.3 Programming the On/Off times in 24 hour
mode
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
To Next Page
Loading...
Need help?
General
