Danfoss VLT 2800 Series General Information

414
Minimum feedback, FB
MIN
(Min. feedback)
Value:
-100,000.000 - par. 415 FB
MAX
0.000
Function:
Parameter 414 Minimum feedback, FB
MIN
and 415
Maximum feedback, FB
MAX
are used to scale the dis-
play text to make it show the feedback signal in a
process unit proportionally to the signal on the input.
Description of choice:
Set the value to be shown on the display as the mini-
mum feedback signal value on the selected feedback
input (parameters 308/314 Analog inputs).
415
Maximum feedback, FB
MAX
(Max. feedback)
Value:
FB
MIN
- 100,000.000
1500.000
Function:
See description of parameter 414 Minimum feedback,
FB
MIN
.
Description of choice:
Set the value to be shown on the display when the
maximum feedback has been obtained on the selected
feedback input (parameter 308/314 Analog inputs).
416 Process units
(REF/FEEDB. UNIT)
Value:
No unit (No unit) [0]
% (%) [1]
ppm (ppm) [2]
rpm (rpm) [3]
bar (bar) [4]
Cycles/min. (CYCLE/MIN.) [5]
Pulses/sec. (PULSE/SEC.) [6]
Units/sec. (UNITS/SEC.) [7]
Units/min. (UNITS/MIN.) [8]
Units/h (Units/h) [9]
°C (°C) [10]
Pa (pa) [11]
l/s (l/s) [12]
m
3
/s (m3/s) [13]
l/min. (l/min.) [14]
m
3
/min. (m3/min) [15]
l/h (l/h) [16]
m
3
/h (m3/h) [17]
kg/sec. (kg/sec.) [18]
kg/min. (kg/min.) [19]
kg/hour (kg/h) [20]
tons/min. (T/min) [21]
tons/hour (T/h) [22]
Meters (m) [23]
Nm (nm) [24]
m/sec. (m/sec.) [25]
m/min. (m/min) [26]
°F (°F) [27]
In wg (in wg) [28]
gal/sec. (gal/sec.) [29]
ft
3
/sec. (ft3/sec.) [30]
gal/min. (gal/min) [31]
ft
3
/min. (ft3/min) [32]
gal/h (gal/h) [33]
ft
3
/h (ft3/h) [34]
lb/sec. (lb/sec.) [35]
lb/min. (lb/min.) [36]
lb/hour (lb/h) [37]
lb ft (lb ft) [38]
ft/s (ft/s) [39]
ft/min. (ft/min.) [40]
psi (psi) [41]
Function:
Select which of the different units are to be shown on
the display. The unit is read out if an LCP control unit
can be connected, and if Reference [unit] [2] or Feed-
back [unit] [3] has been selected in one of parameters
009-012 Display readout, and in display mode. The unit
is used in Closed-loop also as a unit for minimum/
maximum reference and minimum/maximum feed-
back.
VLT
®
2800 Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.27.A2.22 - VLT
®
is a registered Danfoss trademark 71
Programming

Danfoss VLT 2800 Series Specifications

General

Brand	Danfoss
Model	VLT 2800 Series
Category	DC Drives
Language	English