Danfoss VLT 5027 Operating Instructions

VLT
®
5000 Series
Technical
data
■ Compact, Mains supply 3 x 525 - 690 V
According to international requirements VLT type 5402 5502 5602
Normal overload current (110 %):
Output current I
VLT,N
[A] (525-550 V) 523 596 630
I
VLT, MAX
(60 s) [A] (525-550 V) 575 656 693
I
VLT,N
[A] (551-690 V) 500 570 630
I
VLT, MAX
(60 s) [A] (551-690 V) 550 627 693
Output S
VLT,N
[kVA] (550 V) 498 568 600
S
VLT,N
[kVA] (575 V) 498 568 627
S
VLT,N
[kVA] (690 V) 598 681 753
Typical shaft output [kW] (550 V) 400 450 500
[HP] (575 V) 500 600 650
[kW] (690 V) 500 560 630
High overload torque (160 %):
Output current I
VLT,N
[A] (525-550 V) 429 523 596
I
VLT, MAX
(60 s) [A] (525-550 V) 644 785 894
I
VLT,N
[A] (551-690 V) 410 500 570
I
VLT, MAX
(60 s) [A] (551-690 V) 615 750 855
Output S
VLT,N
[kVA] (550 V) 409 498 568
S
VLT,N
[kVA] (575 V) 408 498 568
S
VLT,N
[kVA] (690 V) 490 598 681
Typical shaft output [kW] (550 V) 315 400 450
[HP] (575 V) 400 500 600
[kW] (690 V) 400 500 560
Max. cable cross-section
to motor and loadsharing
[mm
2
]
4,6
[AWG]
2,4,6
4x240
4x500 mcm
Max. cable cross-section
to brake
[mm
2
]
4,6
[AWG]
2,4,6
2x185
2x350 mcm
Normal overload current (110 %):
Rated input current I
L,N
[A] (525-550 V) 504 574 607
I
L,N
[A] (551-690 V) 482 549 607
High overload torque (160 %):
Rated input current I
L,N
[A] (525-550 V) 413 504 574
I
L,N
[A] (551-690 V) 395 482 549
Max. cable cross-section
power supply
[mm
2
]
4,6
[AWG]
2,4,6
4x240
4x500 mcm
Max. pre-fuses (mains)
[-]/UL
[A]
1
700/700 900/900 900/900
Efficiency
3
0,98
Power loss Normal overload [W] 7249 8727 9673
High overload [W] 5818 7671 8715
Weight IP 00 [kg] 221 236 277
Weight IP 21/Nema1 [kg] 263 272 313
Weight IP 54/Nema12 [kg] 263 272 313
Enclosure IP 00, IP 21/Nema 1 and IP 54/Nema12
1. For type of fuse see section Fuses
2. American Wire Gauge.
3. Measured using 30 m screened motor cables at rated load and rated frequency.
4. Max. cable cross-section is the maximum possible cable cross-section allowed to be fitted on the terminals.
Always comply with national and local regulations on min. cable cross-section.
5. Weight without shipping container.
6. Connection bolt power supply, motor and loadsharing: M10 (compression lug), 2xM8 (box lug), M8 (brake)
MG.51.A9.02 - VLT is a registered Danfoss trademark
33

Danfoss VLT 5027 Specifications

General

Brand	Danfoss
Model	VLT 5027
Category	DC Drives
Language	English