Danfoss vlt aqua Operating Instructions

Fuses 55
Control Cable Routing 58
Electrical Installation, Control Terminals 58
Connection Examples for Control of Motor with External Signal Provider 60
Start/Stop 60
Pulse Start/Stop 60
Electrical Installation - additional 62
Electrical Installation, Control Cables 62
Switches S201, S202, and S801 64
Final Set-up and Test 65
Additional Connections 67
Mechanical Brake Control 67
Motor Thermal Protection 68
5 How to Operate the Low Harmonic Drive
69
Ways of Operation 69
How to operate graphical LCP (GLCP) 69
Tips and tricks 76
6 How to Programme the Low Harmonic Drive
81
How to Programme the Frequency Converter 81
How to Programme the Active Filter 87
Using the Low Harmonic Drive in NPN Mode 87
VLT AQUA Drive - Description of Common Parameters 88
Main Menu 88
Parameter Options 124
Default settings 124
Operation/Display 0-** 125
Load/Motor 1-** 126
Brakes 2-** 127
Reference / Ramps 3-** 127
Limits / Warnings 4-** 128
Digital In/Out 5-** 129
Analog In/Out 6-** 130
Comm. and Options 8-** 131
Profibus 9-** 132
CAN Fieldbus 10-** 132
Smart Logic 13-** 133
Special Functions 14-** 133
FC Information 15-** 134
Data Readouts 16-** 135
Data Readouts 2 18-** 136
Contents
VLT AQUA Low Harmonic Drive Operating In-
structions
2 MG.20.T1.02 - VLT
®
is a registered Danfoss trademark

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled