•
•
4 Mechanical Installation
4.1 Items Supplied
Items supplied can vary according to product conguration.
Make sure that the items supplied and the information on the nameplate correspond to the order conrmation.
Visually check the packaging and the drive for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarication.
e30bu138.11
1
2
3
4
5
6
e30bu766.10
Illustration 12: Example of a Product Nameplate for E6h Enclosure (IEC Version on Left, UL Version on Right)
Part number and serial number
Input voltage, frequency, and current (at low/high
voltages)
Output voltage, frequency, and current (at low/high
voltages)
N O T I C E
WARRANTY
Removing the nameplate from the drive results in loss of warranty.
4.2 Split Shipment
Depending on what options are ordered with an enclosed drive, the drive can consist of 5 cabinets and measure 3400 mm (134 in)
in width, which can be dicult to transport and handle. In cases where an enclosed drive exceeds 1800 mm (71 in) in width, the
cabinets are separated and shipped in multiple boxes. All necessary fasteners needed for reassembly are provided in the delivery. To
reassemble a split shipment, refer to 4.10 Combining Multiple Cabinets from a Split Shipment and 5.6.1 Connecting Wiring Harness-
es.
AQ357954340588en-000201 / 130R088134 | Danfoss A/S © 2020.09
Mechanical Installation
VLT® Refrigeration Drive FC 103
Operating Guide
To Next Page
Loading...
Need help?
General