Danfoss VLT Soft Starter MCD 600 User Manual

6
6.1
6.2
6.3
6.4
7
7.1
7.1.1
7.1.2
7.1.2.1
7.1.2.2
7.1.2.3
7.1.3
7.1.3.1
7.1.3.2
7.1.3.3
7.1.3.4
7.1.3.5
7.2
7.2.1
7.2.2
7.2.2.1
7.2.2.2
7.2.2.3
7.2.3
7.2.3.1
7.2.3.2
8
8.1
8.2
8.2.1
9
9.1
9.2
9.3
9.4
Operation 17
Requirements for Successful Operation 17
Device Classification 17
Ensuring Safe and Successful Control 17
Feedback LEDs 17
Messaging 18
Implicit Messaging (Cyclic Operation) 18
Assembly Objects 16
Control Commands (Assembly Instance 104d) 18
Bytes 0–1: Command 18
Bytes 2–3: Reserved 18
Command Examples 18
Status Information (Assembly Instance 154d) 19
Bytes 0–1: Starter State 19
Bytes 2–3: Reserved 19
Bytes 4–7: Motor Current 19
Bytes 8–9: Trip Code 20
Bytes 10–11: Reserved 20
Explicit Messaging (Acyclic Operation) 20
Identity Object (Class 0x01) 20
Vendor-specific Objects 20
Class 100 and 101 Objects (Read/Write) 20
Class 103 Objects (Read Only) 20
Class 104 Objects (Read Only) 22
Supported Services for Vendor-specific Objects 22
Service Codes for Acyclic Operation 23
Status Codes for Acyclic Services 23
Attributes 24
Trip Codes 24
Parameter Lists 25
Parameters, Class 100 and Class 101 Objects (Read/Write) 26
Network Design 30
Star Topology 30
Line Topology 30
Ring Topology 31
Combined Topologies 31
AN353423548483en-000101/130R09454 | Danfoss A/S © 2020.12
Contents
EtherNet/IP Card
Installation Guide

Danfoss VLT Soft Starter MCD 600 Specifications

General

Brand	Danfoss
Model	VLT Soft Starter MCD 600
Category	Controller
Language	English