Page 9 of 19
November 2013
LAMINATE OVERVIEW
The CD800 CLM has an option for either one or two laminators, both capable of running the new
DuraShield™ Clear and Holographic Overlays, Datacard
®
DuraGard
®
Clear and Holographic
Laminates, and Clear or Holographic Topcoats. Two laminators allow customers to use two
different durability or security products, as well as provide front and back lamination. When
upgrading to the CD800 CLM, any custom holographic laminates will have to be replaced with
those designed for the CD800 laminator.
Topcoat N Y Y N N Y Y
0.08 mil-0.1 mil
N
DuraShield N Y Y N N Y Y
0.4 mil
Y
DuraGard Y N Y Y Y Y Y
0.5 mil-1.0 mil
N
Requires T panel
in Ribbon to
apply Overlay
Refer to the CD800 CLM Supplies Data Sheet for the most current information on ribbons,
durability and security supplies.
REPLACEMENT PRINTHEADS
The CD800 CLM has been optimized so one print head can be used to accomplish both color
and monochrome printing. The same print head can be used in the CP80 printer, CP80 Plus
printer and CD800 CLM.
CLEANING SUPPLIES
The cleaning system for the CD800 CLM includes a user replaceable adhesive cleaning sleeve
to clean the cards prior to and after each printing. An isopropanol cleaning card is also used to
clean the card transport rollers and the optional magnetic stripe head. Datacard Group also
offers an adhesive cleaning card for use in the laminators. This cleaning card is only required
with topcoat and or DuraShield Overlay products to optimize the quality of lamination.
The CD800 CLM requires the use of the following cleaning supplies for regular
preventative maintenance:
+ New Enhanced Adhesive Cleaning Sleeve
+ Isopropanol Cleaning Card
+ Adhesive Cleaning Card
+ Cleaning Swab
The adhesive cleaning sleeve and isopropanol cleaning card are included in all ribbon kits.
Additionally, the cleaning accessories noted above are also available in convenient 5 and 10
packs.
Distinctive Blue Core with Platinum Flecks
®
To ensure you are using Datacard Certified Supplies, look for ribbons, laminates and topcoats that
feature our distinctive blue core with platinum flecks
®
. The color blue with platinum flecks mark is
a registered trademark of DataCard Corporation in the United States and/or other countries. In
addition to the Datacard supplies trademarked distinctive blue cores with platinum flecks
®
, the
laminate supplies will now contain cores that are color matched to the lamination spindles within
the laminator, enabling intuitive and easy installation.
To Next Page
Loading...
Need help?
General
