DataCard CD820 User Reference Guide

Datacard CD820 User Reference Guide Common LCD Messages
7
6
114: Cover opened during job
Cause: The printer cover was opened while prinng.
1. Check all printer doors to make sure that they are closed completely.
Press down on the cover ridges to make sure that the cover latches completely
on both sides.
2. Make sure that all doors are locked.
3. Press the USER buon to clear the message.
Refer to “Close the Printer Doors” on page 15 for more informaon.
150: Print while unlocked
Cause: The printer is unlocked.
The card will be canceled.
Make sure that all access doors are closed and locked securely.
Refer to “Close the Printer Doors” on page 15 for more informaon.
151: Failed to lock
Cause: An aempt to lock the printer failed.
The card will be canceled.
1. Make sure that all access doors are closed securely.
2. Try locking the printer again.
Make sure that the reject tray is installed properly before locking the printer.
Refer to “Empty the Reject Card Tray” on page 14 and “Close the Printer Doors”
on page 15 for more informaon.
172: Insert cleaning card
Cause: The printer is ready to be cleaned.
• If the cleaning card is in the input hopper, press the USER buon.
OR
• If the cleaning card is not in the input hopper, insert the card into the printer
and then press the USER buon.
Refer to “Clean the Printer” on page 8 for more informaon.
173: Improper shutdown
Cause: The system was shut down improperly or lost power.
1. Press and hold the USER buon to clear the message.
2. Always use the POWER buon to power o the printer.
Refer to “Check Power Connecons” on page 16 and “Check Data Connecons”
on page 17 for more informaon

DataCard CD820 Specifications

General

Brand	DataCard
Model	CD820
Category	Printer
Language	English