viii
Optional Equipment___________________________________________________________ 89
Large Output Hopper______________________________________________________ 89
200-Card Input Hopper ____________________________________________________ 89
Cable Lock _______________________________________________________________ 89
Cables and Power Supplies____________________________________________________ 90
Data Cables ______________________________________________________________ 90
USB Cable _____________________________________________________________ 90
Network Cable ________________________________________________________ 90
USB Smart Card Cable _________________________________________________ 90
Power Supplies ____________________________________________________________ 90
Power Cords ______________________________________________________________ 91
Appendix A:SD460 Laminating System ___________________________________________ A-1
About the SD460 System _____________________________________________________ A-1
SD460 Site Requirements _____________________________________________________A-2
SD460 Electrical Requirements ________________________________________________ A-2
Unpack the System __________________________________________________________ A-3
Bolt-Down Option ____________________________________________________________ A-4
Assemble the Printer and Laminator __________________________________________A-6
Connect the Power Cords ____________________________________________________ A-7
Connect the USB Cable ______________________________________________________A-8
Connect the Network Cable _________________________________________________ A-8
Load Laminator Overlay Material _____________________________________________ A-9
Power On the System _______________________________________________________A-11
Print a Test Card ____________________________________________________________A-11
Use the Card Printer Driver ______________________________________________ A-11
Use the Printer LCD Panel _______________________________________________ A-12
Use Printer Manager ____________________________________________________ A-13
Verify the Test Card_____________________________________________________ A-15