6 SD460 SLM Laminating System
SD460 Laminating System Quick Install Guide
d. Lift the printer over the laminator and align the pins on
the laminator with the holes on the underside of the
printer.
Back
Front
e. Pressdownontheprintercarefully,butrmly,to
position it.
f. Push the printer locking lever to the right to lock the
printer to the laminator. Make sure that the printer is
locked securely to the laminator.
g. Connect the interconnect cable to the bottom data port
of the printer.
To Next Page
Loading...
Need help?
General
