Mounting Bracket
6 Customer Service Scanner
Mast Mounts
Two types of Mast Mounts are available that allow convenient in-
stallation of the CSS in a position adjacent to the scanner’s bon-
net. When installing a Mast Mount, remove the plug from the
desired mount location. Retain the plug for re-installation in case
the mount is ever removed.
Side Mast Mount
The Side Mast Mount can optionally be installed on either the right or
left side of the scanner’s bonnet. The mount is secured beneath the
scanner using two screws and a cosmetic piece plug, and snugs
against the scanner’s side, leaving an opening through which the ca-
ble for the CSS is routed.
Figure 7. Mast Mounts
Back Mast Mount
The Back Mast Mount secures and contours against the back of
the scanner in the same manner.
Back Mast Mount
Side Mast
Mount
Plug
Screws
To Next Page
Loading...
Need help?
General