Datalogic PowerScan PM9100 Series User Manual

Operating Mode
Quick Reference Guide 19
Operating Mode (continued)
Motion Aiming Control
This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected. Scan the Enter/Exit Programming bar code
above, then either of the barcodes below.
ENTER/EXIT PROGRAMMING MODE
 Scan Mode =
Trigger Single
Scan Mode = Trigger
Pulse Multiple
Scan Mode =
Trigger Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
 Motion Aiming Control =
Enable
Motion Aiming Control =
Disable

Datalogic PowerScan PM9100 Series Specifications

General

Brand	Datalogic
Model	PowerScan PM9100 Series
Category	Barcode Reader
Language	English