Setting Up the Reader
2
QUICKSCAN™ QBT/QM2500
Wi-Fi. At the same time, Datalogic confirms its commit-
ment on Bluetooth models – the QuickScan QBT2500 –
that provide maximum flexibility and solves most end user
applications, by increasing both the autonomy and the
radio range.
The QuickScan 2500 Series features the distinctive design
and family feeling of the Datalogic general purpose offer-
ings of handheld scanners, providing the latest USB-C con-
nectivity. This offer includes a variety of stands, holders,
and accessories to provide associates the best fit in their
working environment.
SETTING UP THE READER
Follow the steps below to connect and get your reader up
and communicating with its host.
1. Configure the Base Station starting on this page.
2. Charge the Batteries (see page 10).
3. Link to the Base Station (see page 13).
4. Select the Interface Type (see page 15).
5. Configure the Reader starting on page 16 (optional,
depends on settings needed)
NOTE: According to recent modification of Regula-
tion for shipping Li-Ion based battery packs, the
products and their spare battery packs parts are
shipped with a very low residual charge (low state
of charge).
Hence the needs:
• that a new product must be fully recharged
before starting to use it.
and
• that battery packs of the stocked products
QBT/QM2500 and spare battery pack parts
must be periodically recharged. For instance,
by using a BC2090 cradle powered up with a
12V Datalogic AC/DC adapter (cod.8-0935)
for at least 30 minutes each 3 months or con-
necting the reader to an USB Type-C cable for
the same time.
To Next Page
Loading...
Need help?
General
