Operating Modes
24
QUICKSCAN™ 2500
scanning. Double Read Timeout
1
prevents undesired mul-
tiple reads while in this mode.
Flashing - The reader illuminator flashes on and off
regardless of the trigger status. Code reading takes place
only during the Flash On Time
1
. Double Read Timeout
1
prevents undesired multiple reads.
Always On - The illuminator is always ON and the reader
is always ready for code reading. Double Read Timeout
1
prevents undesired multiple reads.
Object Detection - The scanner looks for changes within
its field-of-view. The Aiming Pattern is always on to show
the optimum reading area. If a predefined amount of
movement is detected, the red illumination switches on.
Scanning continues until a label is read or Scanning Active
Time
1
expires.
1. See the Product Reference Guide (PRG) for these and other pro-
grammable features.
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
★ Trigger Single
Trigger Hold Multiple
Trigger Pulse Multiple
To Next Page
Loading...
Need help?
General
