Datamax Allegro 2 User Manual

Allegro2 D-1
Appendix D
Error Codes
The error codes that may be transmitted by the Printer are described
here.
Lowercase "v"
There is an input buffer overflow situation.
Uppercase "R"
This code is sent every time the Printer is turned on. It signals that
there was a hardware reset.
Uppercase "T"
This code signals that there was a software reset. A software reset
results from sending the <SOH># command sequence to the Printer
or by doing a front panel reset.

Datamax Allegro 2 Specifications

General

Print Resolution	203 dpi
Print Speed	6 inches per second
Connectivity	USB, Serial, Ethernet
Supported Media Types	Labels, Tags
Media Width Range	1 inch to 4.25 inches
Power Requirements	100-240 VAC, 50-60 Hz