EasyManuals Logo

Datamax Mark II User Manual

Datamax Mark II
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background image
Agency Compliance and Approvals
C US
Listed
UL60950-1, First Edition, Information Technology Equipment
CSA C22.2 No. 60950-1-03, First Edition
IEC 60950-1 :2001, First Edition
The manufacturer declares under sole responsibility that this product conforms to the
following standards or other normative documents:
EMC: EN 55022 (2006) Class A
EN 50024 (1998)
Safety: This product complies with the requirements of IEC 60950-1:2001, First Edition
Gost-R
GB4943-2001, GB9254-1998, GB17625-1-2003
FCC: This device complies with FCC CFR 47 Part 15 Class A.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions in
this manual, it may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datamax Mark II and is the answer not in the manual?

Datamax Mark II Specifications

General IconGeneral
Print MethodThermal Transfer/Direct Thermal
Resolution203 dpi
Max Print Speed6 ips (152 mm/s)
ConnectivityUSB, Serial, Parallel, Ethernet
Media SensorReflective/Transmissive
Processor32 bit RISC processor
Media TypesLabels, Tags, Tickets
Media Thickness0.002 to 0.010 inches
Power Source100-240V AC, 47-63 Hz
Ribbon Width1.0 to 4.25 inches

Related product manuals