For start operating with PD20/PD20-1 needs to be paired to another Bluetooth BLE device with
installed application. For downloading the latest SDKs for iOS, Android and Windows please contact
with your distributor.
Application download mode - to enter application download mode on the PD20/PD20-1, the power
button must be maintained pressed and USB cable plugged. A characteristic sound is played and first
white LED will start to light, then is releasing the power button. When device is in Boot
Loader/Application download mode will be played characteristic sound.
System mode - to enter in “SYSTEM MODE” on the PD20/PD20-1, the power button must be
maintained pressed and USB cable plugged. A characteristic sound is played and first white LED will
start to light. Power button must be hold until third white LED is light on, then is releasing the power
button.
Clear Bluetooth paring information - to enter in “Clear Bluetooth Pairing Info” on the PD20/PD20-1,
the power button must be maintained pressed. A characteristic sound is played, and first white LED
will start to light, then is releasing the power button. When pairing info will be played characteristic
sound.
To Next Page
Loading...
Need help?
General
