EasyManuals Logo
Home>Dawlance>Microwave Oven>DW-393 GSS

Dawlance DW-393 GSS User Manual

Dawlance DW-393 GSS
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
10
COUNTERTOP INSTALLATION
INSTALLATION
7.5cm
30cm
OPEN
1. Select a level surface that provides
enough open space for the intake
and/or outlet vents.
(c) Blocking the intake and/or outlet
openings can damage the oven.
(d) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or
TV reception.
2. Plug your oven into a standard
household outlet. Be sure the
voltage and the frequency is the
same as the voltage and the
frequency on the rating label.
The rear surface of appliance shall be
placed against a wall.
A minimum clearance of 3.0 inches
(7.5cm) is required between the oven
and any adjacent walls. One side
must be open.
(a) Leave a minimum clearance of 12
inches (30cm) above the oven.
(b) Do not remove the legs from the
bottom of the oven.
WARNING: Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.
The accessible surface
may be hot during
operation.
Remove all packing material and
accessories. Examine the oven for
any damage such as dents or
broken door. Do not install if the
oven is damaged.
Cabinet: Remove any protective lm found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
OPERATING INSTRUCTIONS
11
Note:The step quantities for the adjustment time of the coding switch are as follows:
1) Press " Microwave " once, the screen displays "P100".
2) Press " Microwave " once again or press " or " to choose 80%
microwave power.
3) Press " Start/+30Sec./Confirm " to conrm, and the screen displays
"P80".
4) Press “ or ”to adjust the cooking time until the oven displays
"20:00".
5) Press " Start/+30Sec./Confirm " to start cooking.
When the microwave oven is electried, the LED will display "0:00", the
buzzer will ring once.
1) Press " Clock/Kitchen Timer " once, the hour gures will ash.
2) Press “ or ” to adjust the hour gures, the input time
should be within 0--23.
3) Press " Clock/Kitchen Timer " the minute gures will ash.
4) Press “ or ” to adjust the minute gures, the input time
should be within 0--59.
5) Press " Clock/Kitchen Timer " to nish clock setting. ":" will
ash, and the time will light.
1. CLOCK SETTING
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
:
:
:
:
:
2. MICROWAVE COOKING
Press " Microwave " the LED will display "P100". Press " Microwave " for
times or press " or " to choose the power you want, and "P100", "P80",
"P50", "P30 " or "P10" will display for each added press. Then press
" Start/+30Sec./Confirm " to conrm, and press " or " to set cooking
time from 0:05 to 95:00. Press " Start/+30Sec./Confirm " again to start
cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes,
you can operate the oven using the following steps.
Note:
1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear ", the oven will go back
to its previous status automatically.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dawlance DW-393 GSS and is the answer not in the manual?

Dawlance DW-393 GSS Specifications

General IconGeneral
BrandDawlance
ModelDW-393 GSS
CategoryMicrowave Oven
LanguageEnglish

Related product manuals