85
4 / USING YOUR APPLIANCE
EN
CONTROL PANEL LOCKING (CHILD SAFETY)
OVEN OFF
You have the option of preventing access to
the oven controls by taking the following
steps:
When the oven is off, hold down the
touch control for a few seconds; a “key” will
then be displayed on the screen -> access to
the oven controls is now blocked (fig.1).
To unlock access, hold down the touch
control for a few seconds.
The oven controls are once again accessible.
•
Warning
You cannot lock the oven if you have programmed a cooking cycle.
fig.1
- Your oven’s programmer can be used as an
independent timer that allows you to count
down a time wiith
out operating the oven.
In this case, the timer display has priority over
the clock display.
- Press the touch control 3 times (fig.1).
The 0m00s symbol flashes.
- Adjust the chosen time by pressing the + or -
touch controls (max 59 minutes 50 seconds)
(fig.2).
- Press the
OK
button to confirm.
Warning
It is possible to change or cancel the timer programme at any time by turning it to 0:00 and
pressing the START/STOP.
fig.1
fig.2
USING THE TIMER FUNCTION
•
The display stops flashing after a few seconds and the timer starts working, counting down the
time in seconds.
Once the time has expired, the timer emits a series of beeps to notify you.
The beeps can be stopped by pressing any touch control.
99643682_A_ML.qxp 25/09/2007 13:00 Page 85
To Next Page
Loading...
Need help?
General
