12
Definitive Technology “D.” LED Logo
To highlight the integrated powered subwoofers, you will note an LED logo at the bottom front panel of each
BP9000 tower speaker. This logo will default to “on” but can be completely disabled by simply pressing the LED
ON/OFF button on the back of the loudspeaker. When enabled, the LED logo will engage only once it’s receiving
an active signal from your receiver/processor. It will automatically turn off/standby after 20 minutes of no active
signal.
Complete Home Theater System
We strongly suggest that you use the timbre-matched BP9000 Definitive Technology center channel and rear/
surround speakers to complete your home theater system. Please note that you can use Definitive Technology
towers as rear or side surround speakers with excellent results for both music and movies.
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding your BP9000 or its setup. Please contact
your nearest Definitive Technology dealer or call us directly at (800) 228-7148 (US & Canada), 01 (410) 363-7148 (all
other countries) or e-mail info@definitivetech.com. Technical support is offered in English only.
To Next Page
Loading...
Need help?
General
