more information visit our website at www.definitivetech.com 9
Sound Bar Controls and LED Display
1. POWER: Press to turn on the system (sound bar and wire-
less subwoofer).
2. SOURCE (Symbol ): Six LED lights correspond to each of the six
source inputs. Example: You want to play a Blu-ray disc and are
currently playing another source on input #1. Your Blu-ray player
is connected to source input #2. Simply touch this switch once to
select the input.
Please note: When advancing more than one source, please allow
for a few seconds of delay.
3. Volume DOWN: Press – to decrease the system volume. A
row of LED’s displays the volume level. It takes 4-5 presses to
change the LED, but you will hear, and see on the OSD pop-up
screen, that the volume is decreasing.
4. Volume UP: Pressing + to increase the system volume, with
a corresponding change in the LED display/OSD.
5. Bluetooth Source/Pairing: Press once to select Bluetooth
®
Input. Press and hold to pair the sound bar with a
Bluetooth device.
Note: you can also press and hold the BT button on the remote
to pair.
To Next Page
Loading...
Need help?
General
