Dell 1135N User Manual

Alignment and Troubleshooting
4-24
Service Manual
4.1.10 Error Message
Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables
below to understand the messages’ and their meaning, and correct the problem, as is necessary.
Checking display messages
• If a message is not in the table, reboot the power and try the printing job again.
• Some messages may not appear in the display depending on the options or models.
• [error number] indicates the error number.
• [tray type] indicates the tray number.
• [media type] indicates the media type.
• [media size] indicates the media size.
• [color] indicates the color of toner or imaging unit.
Message Meaning Suggested solutions
[COMM. Error] The machine has a communication
problem.
Ask the sender to try again.
[Incompatible] The machine has received a fax which
is registered as a junk fax.
The received fax data will be deleted.
Reconfirm junk fax setup.
[Line Error] Your machine cannot connect with the
receiving fax machine or has lost
contact because of a problem with the
phone line.
Try again. If the problem persists, wait
an hour or so for the line to clear and
try again. Or, turn the ECM mode on.
[No Answer] The receiving fax machine has not
answered after several redial ttempts.
Try again. Make sure that the receiving
machine is operational and has paper.
[Stop Pressed] Stop/Clear has been pressed during
an operation.
Try again.
ADF COVER
OPEN ERROR
The ADF cover is opened. Close the ADF cover.
BOOTP problem
Auto IP Run
The IP address assignment is failed.
This happens, when Auto IP for
BOOTP is set in SyncThru Web
Service.
Change the IP address assignment
method to DHCP or Static. If you do
not change this option, the BOOTP
server continually asks to assign the
IP Address.
BOOTP problem
Reconfigure DHCP
The IP address assignment is failed.
This happens, when Auto IP for
BOOTP is not set in SyncThru Web
Service.
Change the IP address assignment
method to DHCP or Static. If you do
not change this option, the BOOTP
server continually asks to assign
the IP Address.
DHCP problem
Reconfigure BOOTP
The IP address assignment is failed.
This happens, when Auto IP for DHCP
is set in SyncThru Web Service.
Change the IP address assignment
method to BOOTP or Static. If you
do not change this option, the DHCP
server continually asks to assign
the IP Address.

Dell 1135N Specifications

General

Dimensions (WxDxH)	416 x 415 x 319 mm
Energy saving mode	Yes
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	No
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print resolution black	600 x 600 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	23 ppm
Printing colors	Black
Maximum duty cycle	12000 pages per month
Number of print cartridges	1
Copier resize	25 - 400 %
Maximum number of copies	99 copies
N-in-1 copy function (N=)	4
Time to first copy (black, normal)	12 s
Copy speed (black, normal quality, A4)	22 cpm
Grayscale levels	10
Maximum scan area	A4 / Letter (216 x 297) mm
Output color depth	16 bit
Image formats supported	BMP, JPEG XR, TIF
Optical scanning resolution	4800 x 4800 DPI
Faxing	Mono faxing
Fax memory	320 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	200
Total input capacity	250 sheets
Total output capacity	80 sheets
Maximum input capacity	251 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C5, C6
Maximum ISO A-series paper size	A4
Display	LED
Market positioning	Home & office
Direct printing	-
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	1 W
Power consumption (standby)	45 W
Power consumption (PowerSave)	10 W
Power consumption (average operating)	420 W
Package weight	14.8 g
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64