EasyManuals Logo

Dell 1708FP User Manual

Dell 1708FP
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Back to Contents Page
Solving Problems
Dell™ 1708FP Flat Panel Monitor User's Guide
Troubleshooting Your Monitor
General Problems
Product Specific Problems
USB Problems
Troubleshooting Your Soundbar
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.
Troubleshooting Your Monitor
Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and
computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white
connector) and the Analog(blue connector) cables from the back of computer.
3. Turn on the monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog box should appear on a black background if the monitor cannot
sense a video signal. Using the input select button, select the desired input to be tested either Analog Input or Digital
Input. Disconnect the video cable from the video card and the Dell Self-test Feature Check dialogue box will appear if
the display is operating correctly.
or
or

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell 1708FP and is the answer not in the manual?

Dell 1708FP Specifications

General IconGeneral
Pixel pitch0.264 x 0.264 mm
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range56 - 76 Hz
Horizontal scan range30 - 81 kHz
Contrast ratio (typical)800:1
Viewing angle, horizontal160 °
Display brightness (typical)300 cd/m²
Special featuresUltraSharp
Power requirements100 to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 2.0A
HDCPYes
USB hub version2.0
USB Type-A downstream ports quantity4
CertificationTCO '99
Product colorBlack
Market positioningBusiness
Panel mounting interface100 x 100 mm
Package weight8400 g
Sustainability certificatesENERGY STAR
Input current2 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)75 W
Power consumption (off)1 W
Power consumption (standby)2 W
Power consumption (typical)35 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)265.2 mm
Width (with stand)372.1 mm
Height (with stand)512.6 mm
Weight (without stand)3680 g

Related product manuals