Dell 5100cn User Manual

Maintenance 47
Replacing the Transfer Roller
CAUTION: Before performing any of the following procedures, read and follow the "CAUTION: SAFETY
INSTRUCTIONS" on page 9.
Dell transfer roller are available only through Dell. You can order more online at
http://www.dell.com/supplies or by phone. To order by phone, see"Order Printer Supplies" on
page 2.
Dell recommends Dell transfer roller for your printer. Dell does not provide warranty coverage for
problems caused by using accessories, parts, or components not supplied by Dell.
Removing the Used Transfer Roller
CAUTION: Never throw a used transfer roller into a fire. It could explode resulting in burns and
injuries.
CAUTION: Do not touch the edge of the plate at the upper side of the transfer roller because it is sharp.
NOTE: Remove any print jobs from the center output tray, and close the multipurpose feeder cover
before opening the front cover.
1.
Push the front latch up and fully open the front cover.
2. Grip the tabs at both ends of the transfer roller and gently lift it out of the printer.

Dell 5100cn Specifications

General

Connectivity Technology	Wired
Interface	USB, Ethernet
Media Type	Plain paper, envelopes, labels, transparencies, card stock
Output Capacity	250 sheets
Print Technology	Laser
Print Resolution	600 x 600 dpi
Standard Connectivity	USB 2.0, Ethernet
Paper Handling	150-sheet multipurpose tray
First Page Out	13 sec
Supported Operating Systems	MS Windows 2000, MS Windows XP, MS Windows Server 2003, Apple Mac OS X 10.2 or later