Dell E75S001 User Manual

Figure 98. Removing the BOSS S2 module cover
Next steps
1. Replace the BOSS S2 controller card module.
Installing the BOSS S2 controller card
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Slide the BOSS cover on the BOSS S2 controller card module. Using the Phillips #1 screwdriver, secure the BOSS cover on
the BOSS S2 controller card module with the M3 x 0.5 x 4.5 mm screw.
102
Installing and removing system components

Dell E75S001 Specifications

General

Brand	Dell
Model	E75S001
Category	Server
Language	English