Dell Latitude 3410 User Manual

2. Remove the SD Card.
3. Remove the base cover.
4. Disconnect the battery.
5. Remove the IO board.
6. Remove the solid state drive.
About this task
The figure indicates the location of the Power Button and provides a visual representation of the removal procedure.
Steps
1. Disconnect the power button connector cable from the daughterboard module. Peel off the adhesive cover from over the
power button assembly.
2. Remove the two (M2x2) screws that secure the shield over the power button module.
3. Lift the Power Button module away from the computer.
Installing the Power Button
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the power button and provides a visual representation of the installation procedure.
62
Disassembly and reassembly

Dell Latitude 3410 Specifications

General

Brand	Dell
Model	Latitude 3410
Category	Laptop
Language	English