Display back cover assembly
Replacing the display back cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the display panel.
8. Remove the camera.
9. Remove the display cable.
About this task
After performing the preceding steps, you are left with the display back cover.
Next steps
1. Replace the display cable.
2. Replace the camera.
3. Replace the display panel.
4. Replace the display bezel.
5. Replace the display assembly.
6. Replace the battery.
7. Replace the base cover.
8. Replace the SD card.
9. Follow the procedure in after working inside your computer.
Disassembly and reassembly
77