Dell N2048 User Manual

Getting Started Guide 41
Unpacking the N30xx Switch
Package Contents
When unpacking each switch, make sure that the following items are
included:
• One Dell Networking switch
• One RJ-45 to DB-9 female cable
• One ReadyRail kit for rack installation, two mounting brackets, bolts, and
cage nuts
• One set of self-adhesive rubber pads for the free-standing switch (four pads
are included)
•One PSU
Unpacking Steps
NOTE: Before unpacking the switch, inspect the container and immediately report
any evidence of damage.
1 Place the container on a clean, flat surface and cut all straps securing the
container.
2 Open the container or remove the container top.
3 Carefully remove the switch from the container and place it on a secure
and clean surface.
4 Remove all packing material.
5 Inspect the product and accessories for damage.

Dell N2048 Specifications

General

Model	N2048
Category	Switch
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
RAM	512 MB
PoE	No
Ports	48 x 10/100/1000BASE-T
Uplink Ports	2 x 10GbE SFP+
Additional Uplink Ports	2 x 10G SFP+
MAC Address Table Size	16, 000 entries
Dimensions	440 x 44 x 350 mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)