Steps
1. Align the screw holes of the battery with the screw holes on the palm-rest and keyboard assembly.
2. Place the battery on the palm-rest and keyboard assembly.
3. Replace the eight screws (M1.6x2.5) that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Fan
Removing the fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image(s) indicate the location of the fan and provides a visual representation of the removal procedure.
18
Removing and installing components
To Next Page
Loading...
Need help?
General
