Projector Status Description Power Indicator
If the problem persists,
contact Dell.
Lamp driver breakdown
The lamp driver has failed.
The projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn the display on
again. If this problem
persists, contact Dell.
AMBER Flashing OFF AMBER Flashing
Color Wheel breakdown
Color wheel cannot start.
The projector has failed
and the projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn on the
projector. If this problem
persists, contact Dell.
White AMBER Flashing AMBER Flashing
Lamp failure Lamp is defective.
Replace the lamp.
OFF OFF AMBER
Fault - DC supply (+12V) Power supply has been
interrupted. The projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn on the
projector. If this problem
persists, contact Dell.
AMBER Flashing AMBER AMBER
Lamp module connection
failed
Lamp module connection
may be disrupted. Check
the lamp module and
ensure that it is properly
installed. If the problem
persists, contact Dell.
OFF OFF AMBER Flashing
Guiding Signals
35