Dell SE2417HG User Manual

12 | Setting up the monitor
Connecting your monitor
WARNING: Before you perform any of the procedures in this section, follow
the Safety instructions.
NOTE: Do not connect all cables to the computer at the same time. It is
recommend to route the cables through the cable-management slot before you
connect them to the monitor.
To connect your monitor to the computer:
1.
Turn off your computer and disconnect the power cable.
2.
Connect the VGA/HDMI cable from your monitor to the computer.
Connecting the VGA cable
Connecting the HDMI cable (sold separately)

Dell SE2417HG Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	24 inches
Panel Type	tn
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	2 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	8, 000, 000:1
Horizontal Scan Rate	83 kilohertz
VGA Ports	1
Power Saving Mode	0.3 watts
Power Consumption	25 watts
Depth with Stand	7.1 inches
Width with Stand	21.9 inches
Net Weight without Stand	9 pounds