Dell SE2717HR User Manual

Setting up the monitor
Connecting the stand
NOTE: The stand is detached when the monitor is shipped from the
factory.
NOTE: This is applicable for a monitor with a stand. If you have
purchased a third-party stand, refer to the respective stand setup
guide for the set up instructions.
To attach the monitor stand:
1. Place the monitor on a soft cloth or cushion.
2. Insert the tabs on the upper part of the stand in to the grooves on the back
of the monitor.
3. Press down the stand till it snaps into place.
2
3
Setting up the monitor │ 21

Dell SE2717HR Specifications

General

Color	piano black, black
Screen Type	led
Tiltable	yes
Webcam	no
OS Compatibility	mac, windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	6 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	8, 000, 000:1
Synchronization	freesync (amd adaptive sync)
Horizontal Scan Rate	83 kilohertz
VGA Ports	1
Power Saving Mode	0.3 watts
Power Consumption	20 watts
Depth with Stand	7.3 inches
Width with Stand	24.5 inches
Net Weight without Stand	12.9 pounds