Safety guidelines
Improper connection, or mounting of the product could result in component failure or undesired interference. Follow the below guidelines
before setting up and operating your device.
• Setup—
• Do not connect to AC power until all other connections—including the power adapter are made. Connecting or disconnecting
components, or equipment on the back panel when the device is receiving AC power can cause power surges, and damage the
device.
• Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is correctly oriented to
the receptacle.
• Venting and care—
• Mount the device only as shown or in accordance with the instructions provided with Dell approved mounting accessory kits.
Improper orientation could restrict the airow of heat from the device and damage it.
• Allow sucient space around the device for ventilation, do not place the device in any enclosure that restricts airow around the
device, and do not place any objects on the device or block the vent outlets. For environmental operating specications, see
System specications.
• Power sources—
• When turning o the device, make sure to perform a complete shutdown—through the power button. Do not disconnect the AC
power cord, DC power cord, or shut o power at a circuit breaker—including power strips, to turn o the device.
• Surge protectors for electrical devices are recommended in areas of lightning. However, when lightning is occurring, your equipment
should be properly shut down and unplugged from AC power until the storm has passed.
7
10 Safety guidelines
To Next Page
Loading...
Need help?
General
