Establishing a PCoIP connection
To establsih a PCoIP connection, do the following:
1 Turn on the zero client and wait until the Connect command button on the zero client user screen is active.
2 Click Connect.
NOTE: If the Connect command button on the zero client user screen is inactive or if the zero client cannot discover
host servers on the network, check the network connection and make sure the Ethernet switch or router is turned on.
The following message is displayed:
Discovering hosts, please wait …
After the process of host discovery is complete, a list of available hosts on the network is displayed.
3 Select the preferred host, and click OK.
5
Establishing a PCoIP connection 7
To Next Page
Loading...
