10
Chapter 2 - Using the control and setting the modes
1 Press the PROGRAM button (7)
until the desired light will be
illuminated. The display will
show the default temperature
350°F
2 If necessary, the desired temper-
ature can be modified by press-
ing the temperature -/+ buttons
(12) or (18). The available tem-
peratures are:
250 - 275 - 300 - 325 - 350 -
375 - 400 - 425 - 450° F (with
BAKE function up to 475° F).
The display will show the chosen
temperature.
• If the cooking time is not set (skipping points 3 and 4), the display will show the countdown starting from the
default duration of
1:00 (1 hour).
• The oven should always be preheated. Wait for the audible signal (3 times 3 short beeps) before placing the
shallow pan (
H) with food in the oven.
• The set time can be modified during cooking by simply repeating points 3 and 4. The countdown will automati-
cally restart 3 seconds after the last setting.
• To display the current temperature (during cooking), simply press the TEMPERATURE button (10). To modify the
set temperature, press again, within 3 seconds, one of the two buttons (12 or 18) until the new desired setting
will be displayed.
•If the START button (17) is not pressed within 3 minutes from the previous setting, the control will return to stand-by.
2.3 - BAKE AND FAN/BAKE FUNCTIONS
3 Then press the TIMER button
(9). The display will show
I:00.
4 Set the time (max 3 hours) by
pressing the “-” (12) and “+”
(18) buttons. Keep the button
pressed for more than 2 sec-
onds to quickly scroll the time
up or down. For each press of
the button the time will
increase or decrease by one 1
minute.
5 Press the START button (17). As
you press START, time selected is
reduced of 1 minute. The oven
will start the countdown. At the
end of the set time the control will
emit 4 beeps and the display will
return to stand-by (showing the
time of the day, if previously set).
To Next Page
Loading...
Need help?
General
