DeLonghi ECAM44660 User Manual

18
11.10 Cleaning the milk container
To keep the frother ecient, every two days clean the milk con-
tainer (D) as described below:
1. Remove the lid (D2);
2. Remove the milk spout (D5) and intake tube (D4) (g. 37);
3. Turn the froth adjustment dial (D1) anticlockwise to the
“INSERT” position (g. 37) and pull it o upwards;
37
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (g. 38). If necessary, scrape the
groove with a toothpick;
38 39
5. Rinse inside the froth adjustment dial seat with running
water (g. 39);
6. Check that the intake tube and spout are not clogged with
milk residues;
7. Replace the dial (in correspondence to the word “INSERT”),
spout and milk intake tube;
8. Place the lid back on the milk container (D3).
11.11 Cleaning the hot water connection nozzle
Each time you prepare milk, clean the connection nozzle (A8)
with a sponge to remove milk residues from the gaskets (g.
26).
12. DESCALING
Descale the machine when the message “DESCALE” ashes on
the display (B4).
Important!
• Before use, read the instructions and the labelling on the
descaler pack.
• You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the appliance on and wait until it is ready for use;
2. Press the MENU/ESC button (B2) to access the menu;
3. Press (B9) or (B10) (g. 6) until “Descale” appears on
the display;
4. Select by pressing the OK button (B3-g. 7). The message
“Descaling Conrm?” is displayed;
5. Press the OK button again to conrm. “EMPTY DRIP TRAY”
is displayed, alternating with “REMOVE FILTER” (if the lter
is present) and “Add descaler, Press OK”;
6. Empty the water tank (A16) completely and remove the
water softener lter (C4), if present. Empty the drip tray
(A12) (g. 27) and grounds container (A10), then put them
back in the appliance;
B
A
A B
40
7. Pour the descaler (C3) into
the tank up to level A
(corresponding to a 3,38
.oz/100 ml pack) marked
on the inner surface of the
tank (g. 40), then add a
litre of water up to level B
(g. 40) and put the water
tank back in the
appliance;
41
2 l
8. Place an empty container
with a minimum capacity
of 67.63 .oz/ 2.0 litres
under the coee spouts
(A7) and hot water spout
(C6) (g. 41);
Important! Danger
of burns
Hot water containing acid
ows out of the coee spouts
and hot water spout. Take care
to avoid contact with splashes of this solution.
9. Press the OK button to conrm that you have added the
descaler solution. The message “Descale underway” is dis-
played and the descaling procedure begins. The descaler

DeLonghi ECAM44660 Specifications

General

Brand	DeLonghi
Model	ECAM44660
Category	Coffee Maker
Language	English