10
OPERATING INSTRUCTIONS
Fig.13
Fig.14
Fig.15
Fig.16
When an alarm light comes on to signal an anomaly, do not contact the service
centre straight away.The problems can almost always be resolved by following the
instructions indicated in paragraphs 12 and 13. If necessary, contact the customer
service by calling the number listed on the sheet enclosed on page 2.
If your country is not listed on the sheet, call the number indicated on the war-
ranty.
When using the machine for the first time, 4-5 cups of coffee need to be
made before the machine starts to give satisfying results.
Fig.17
6 ADJUSTING THE COFFEE GRINDER
The coffee grinder must not be adjusted, at least initially, as it has already
been pre-set in the factory for the correct delivery of the coffee.
Nonetheless, after having made the first coffees, if delivery is too fast or too
slow (in drops), the grinding coarseness must be adjusted using the knob
(Fig.17) located inside the bean container. Turning one click (one number)
clockwise achieves faster delivery of the coffee (without drops).
Turning one click anticlockwise achieves slower delivery
and makes the
coffee creamier in appearance.
These adjustments will only be evident after the delivery of at least 2 cups of
coffee.
The grinding coarseness adjustment knob must only be turned
when the coffee grinder is on.
Turn anticlockwise for finer ground coffee and
consequently slower delivery and a creamier
appearance.
Turn clockwise for coarser ground coffee and
consequently faster delivery (not a drop at a
time).
NOTE 1: The machine has been tested in
the factory using coffee and therefore it is
completely normal to find some traces of cof-
fee in the grinder.
The machine is in any case guaranteed to be
new.
To Next Page
Loading...
Need help?
General
