5
HOW TO USE THE TIMER
Please refer to the illustration below:
IMPORTANT: There are 96 tabs around the dial. Each tab represents a 1/4 hour
(15 minutes) and there is a tab for every quarter hour of the 24 hour day. Your appliance can
be programmed to switch itself ON and OFF at the time you want. With the timer you can
approximate your setting to within 15 minutes and program up to 48 cycles (1 cycle = 1 “ON”
+ 1 “OFF”) over a period of 24 hours (12 hours a.m.+12 hours p.m.).
The tabs can be pushed inwards or pulled outwards by merely using your fingers. When the
tab is in the inward position (towards the center of the dial), the heater will operate during
that 15 minute period. If the tab is in the outward position, the heater will not operate during
this period.
Please note when you first use your heater, all the tabs are outwards. You must push in those
tabs for the period that you want the heater to work. (If you want to bypass the timer you must
push all 96 tabs inward).
Timer operation
a). Plug in the heater.
b). Turn timer dial clockwise to set clock with the current time of day (see CLOCK SETTING).
c). Push tabs inwards for the period you want the heater to operate. For example, the illustra-
tion shows that appliance will operate from 2 a.m. to 4.30 a.m.
d). Push switch(-es) in.
e). Once you have set the tabs for the desired heating periods, your heater will cycle on and
off according to these settings.
f ). As long as you keep the heater plugged in, the timer will continue to keep proper time.
6. MAINTENANCE AND SERVICE
Always remove the plug from the power socket and allow the radiator to cool. Wipe radiator
with a soft damp cloth, do not use detergents and abrasives.
Should the radiator not be in use over a certain length of time, wind the cable round the hol-
der and store it in a dry place (see fig. in front page).
This appliance has been built to give many years of trouble free service.
In case of malfunction or doubt, do not try to repair the heater by yourself: it may results in fire
hazard or electric shock.
Call nearest Service Center (see attached list of Service Centers).
To Next Page
Loading...
Need help?
General
