13
22 23
4. Put the lid back on the milk container;
5. Attach the milk container (D) to the connection nozzles
(A13) and push as far as it will go (g. 23). The machine
emits a beep (if the beep function is enabled);
24 25
6. Place a suciently large cup under the coee spouts (A14)
and milk spout (D7) (g. 24). To lengthen the milk spout,
adjust the extension (D8);
7. Select the desired beverage as described in the following
paragraphs.
Please note:
• The milk container lid incorporates a rell lid (D2) to top
up the milk (g. 25). If during preparation you notice that
the level of the milk is low, add milk through the rell lid
without extracting the container, then complete prepara-
tion of the beverage.
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• ECAM61X.7Y: When using milk at the ideal temperature
(about 5°C), the thermal casing guarantees the eciency
of the MilkCream system for about 30 minutes outside the
refrigerator.
• If "Energy Saving" mode is enabled (see section “6.9 Gen-
eral”), you may have to wait a few seconds before the bev-
erage is delivered.
• The quality of the froth will vary depending on:
• type of milk or vegetable beverage;
• brand used;
• ingredients and nutritional value.
10.2 Adjusting the amount of froth
Turn the froth adjustment
dial (D3) (g. 26) to adjust
the amount of froth on the
milk delivered while making
cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
No froth HOT MILK (not frothed) /
CAFFELATTE
Min. froth CORTADO / FLAT WHITE
Max. froth CAPPUCCINO/ CAPPUCCI
NO+ / CAPPUCCINO MIX/
ESPRESSO MACCHIATO/
LATTE MACCHIATO / LATTE
CALDO (frothed)
10.3 Your milk-based beverage at a touch
To deliver milk-based beverages, on the homepage (B), press
the image corresponding to the desired beverage. The appliance
proceeds with preparation and the image of the selected bev-
erage appears on the display (B5), together with a progress bar
which gradually lls as the operation proceeds and a description
of each individual phase (grinding, brewing coee, milk deliv-
ery, etc.).
At the end of preparation, the message "Your beverage is
ready!" appears on the display. The appliance is now ready to
be used again.
Please note:
As soon as delivery has ended, to increase the quantity of coee,
just press "Extra". When the required quantity is reached, press
"Stop".
26
To Next Page
Loading...
Need help?
General
