22
Operation
TURNING THE APPLIANCE ON
Plug into the mains.
Two lines appear on the display indicating that the appliance is
in standby.
Press the ON/OFF button (A) (when turned on, the air conditio-
ning unit starts operating in the same mode as when it was tur-
ned off).
Press the MODE (B) button until the indicator light corresponding
to the required mode lights up:
Indicator light C : Air-conditioning mode
Indicator light D : BOOST mode (superconditioning)
Indicator light E : Dehumidifying mode
Indicator light F :FAN MODE (air purifying in model T100 eco
only) (in model T100eco, when the selection
has been made, the flaps will open at a pre-
set angle. When the air conditioning unit is
turned off, the flaps will reclose).
AIR-CONDITIONING MODE
Ideal for hot humid weather when you need to cool and dehu-
midify the room.
After selecting the air-conditioning mode, the indicator light (M)
comes on. To set operation of the appliance correctly, press the
“+” (G) or“-” (O) buttons until the required temperature is
displayed.
The most suitable temperature for the room during the summer
varies from 24 to 27°C. You are recommended, however, not to
set a temperature much below the external temperature.
Then select the fan speed by pressing the "FAN" button (T) until the indi-
cator light corresponding to the required fan speed lights up:
MAX (S): the air conditioning unit operates at maximum to reach
the required temperature as rapidly as possible.
MIN (R): reduces noise levels but still maintains a good level of
comfort
SILENT (Q):for silent operation
AUTO (P): the appliance automatically selects the most suitable
fan speed in relation to the temperature set on the digi-
tal display.
BOOST MODE (superconditioning)
This is set in the same way as the "AIR-CONDITIONING" mode, but
with a boost, useful when you want to make a very hot room
comfortable as rapidly as possible.
To Next Page
Loading...
Need help?
General
