Delta Electronics DVP-20EX200R/T User Manual

- 7 -
Ϥ
1
DC power supply
Ϥ
2
Emergency stop
Ϥ
3
Circuit protection fuse
Ϥ
4
The output of the transistor model is “open collector”. If Y0/Y1 is set to pulse output, the
output current has to be bigger than 0.1A to ensure normal operation of the model.
1. Diode suppression: Used when in smaller power (Figure 12)
2. Diode + Zener suppression: Used when in larger power and frequent On/Off (Figure 13)
Ϥ
5
Manually exclusive output: For example, Y3 and Y4 control the forward running and reverse
running of the motor, forming an interlock for the external circuit, together with the PLC
internal program, to ensure safe protection in case of any unexpected errors.
 A/D and D/A External Wiring (For EX2 Model Only)
y A/D y D/A
-10V~+10V
V0+
I0+
VI0-
CH1
-20mA~+20mA
V3+
I3+
VI3-
CH3
Voltage inpu
t
Current input
Shielded cable
Shielded cable
[ Figure 14 ]
VO0
IO0
AG
VO1
IO1
AG
CH1
Isolation wire
-10V~+10V
0mA~20mA
CH2
[ Figure 15 ]
Voltage output
AC drive, recorder,
scale value...
AC drive, recorder,
scale value...
Current output
Isolation wire
Note: When the A/D module is connected to current signals, make sure to short-circuit “V+”
and “I+” terminals.
 I/
/
O Terminal Layouts
y DVP16ES200R/T
X4X3X2X1X0
S/S
24G+24V
X7X6X5
Y4C1Y3Y2Y1Y0C0
D-
Y7Y6Y5
NC
D+D-D+
DVP16ES2-R (8DI/8DO)
SG
X4X3X2X1X0S/S
24G+24V
X7X6X5
Y4Y3Y2Y1Y0
ZPUP
D-
Y7Y6Y5
NC
D+
D-D+
DVP16ES2-T (8DI/8DO)
SG
y DVP24ES200R/T
X4X3X2X1X0S/S X7X6X5
Y3
Y2Y1Y0C0
24G+24V
D-
Y5
Y4C1
NC
D+D-D+
DVP24ES2-R (16DI/8DO)
X17X16X14X13X12X11X10
Y7Y6
X15
SG
X4X3X2X1X0S/S X7X6X5
Y2Y1
Y0
ZP
UP
24G+24V
D-
Y5
Y4
Y3
NC
D+D-D+
DVP24ES2-T (16DI/8DO)
X17X16X14X13X12X11X10
Y7
Y6
X15
SG

Delta Electronics DVP-20EX200R/T Specifications

General

Brand	Delta Electronics
Model	DVP-20EX200R/T
Category	Controller
Language	English