- 2 -
Model
Item
DVP14SS211R DVP14SS211T
Fuse capacity 1.85A/30VDC, Polyswitch
Power consumption 1.8W 1.5W
Power protection With counter-connection protection on the polarity of DC input power
Insulation resistance > 5MΩ (all I/O point-to-ground: 500VDC)
Noise immunity
ESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Comm. I/O: 250kKV
RS: 26MHz ~ 1GHz, 10V/m
Grounding
The diameter of grounding wire cannot be smaller than the wire
diameter of terminals L and N (All DVP units should be grounded
directly to the ground pole).
Operation / storage
Operation: 0°C ~ 55°C (temp.), 50 ~ 95% (humidity), Pollution degree2
Storage: -25°C ~ 70°C (temp.), 5 ~ 95% (humidity)
Vibration / shock
resistance
International standards: IEC61131-2, IEC 68-2-6 (TEST
Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight (g) 97g 82.5g
Input Point
Spec.
Items
24VDC (-15% ~ 20%) single common port input
Input No. X0 ~ X3 X4 ~ X7
Input type DC (SINK or SOURCE)
Input Current (± 10%) 24VDC, 5mA
Input impedance 4.7kΩ
Max. frequency 20kHz 10kHz
OffOn > 15VDC
Action
level
OnOff < 5VDC
OffOn < 10μs < 20μs
Response
time
OnOff < 20μs < 50μs
Filter time Adjustable within 0 ~ 20ms by D1020 (Default: 10ms)
Output Point
Spec.
Items
Relay Transistor
Output No. Y0 ~ Y5 Y0 ~ Y3 Y4, Y5
Max. frequency 1Hz 10kHz 1kHz
Working voltage 250VAC, < 30VDC
5 ~ 30VDC
#1
Resistive 1.5A/1 point (5A/COM) 0.5A/1 point (3A/COM)
Inductive
#2
15W (30VDC)
Max. load
Lamp 20WDC/100WAC 2.5W (30VDC)
OffOn 20μs 100μs
Response
time
OnOff
Approx. 10ms
30μs 100μs
#1: UP, ZP must work with external auxiliary power supply 24VDC (-15% ~ +20%), rated
consumption approx. 1mA/point.
#2: Life curves
Contact
Current(A)
0.5
0.1
0.2
50
0.3 0.7
12
200
300
500
100
1000
2000
3000
O
p
e
r
a
t
i
o
n
(
X
1
0
)
3
120VAC Resistive
30VDC Inductive(t=7ms)
240VAC Inductive(cos 0.4)
ψ
=
120VAC Inductive(cos =0.4)
ψ
30VDC
Inductive
(t=40ms)
[ Figure 2 ]
To Next Page
Loading...
Need help?
General
